Waterproofing Commercial and Residential Buildings in Orlando
Due to the extreme rain and heat we experience in Florida, waterproofing is much needed service in commercial and residential properties. Property managers need to concern themselves with the constant maintenance properties need to keep them waterproof from the elements. We can help you find out the source of water intrusion and repair minor water leaks, re-caulk/seal failing joint systems, and put an end to water damage due to sealant failure on porous exterior walls and surfaces,
Most of the time taking precautions and doing the proper maintenance and repairs preventively will save the property from getting damaged with interior water damage during our rainy season.
Whether you have water leaks or joint system failure, you should call us to evaluate the damage and help you repair it promptly. We do waterproofing in al the Orlando and Miami area and other parts of Central Florida.
Detect and Repair Leaks
Is ofter had to tell where water is seeping through. At Seamless Surfaces we are experts at finding where the problem is coming from and put a stop to it.
If you have a large number of leaks, then we can do a full re-caulking job.
Recaulking and Sealing Joint Systems
All buildings are protected from water by sealed joints. With the passing of time the sealer deteriorates, shrinks and eventually begins to detach itself from the surface. It is always necessary to at some point do a re-caulk of all the joints. We remove the old product, prepare the area so the new sealer adheres properly to it and apply new caulking material.
Where Should You Use It
Waterproofing can be used in Industrial, Commercial and Residential applications.
Some of the places we have waterproofed are…
- Industrial Warehouses
- Balconies
- Commercial Kitchens
- Roofs
- Parking Garages
- Commercial Building
The Waterproofing Process
In order to insure that our waterproofing in Orlando application is secure, will last you a long time and will be covered by the manufacturer’s warranty we always remove the previous material down to the concrete using hand or push behind grinders. We grind the surface until all signs of the previous application has been removed and we ensure we have a rough profile so the new sealers grabs onto it and does not delaminate with time.
To accomplish this we need at least three days of good weather with no rain so the process in not damaged while we’re doing the repairs.